[argyllcms] Re: Monitor calibration

  • From: Graeme Gill <graeme@xxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Fri, 24 Jul 2009 10:31:21 +1000

nome cognome wrote:

Why the default curve loaded in the system is not the linear one
(which is also the Argyll/Spectraview one)?

Possibly because they are relying on the hardware only having
8 bit table entries. If you look, the top 8 bits
of the 16 bit values are a linear curve, so 8 bi table
hardware sees the same values in either case.

The way I obtained those strange values is not by pressing the "reset"
button, but unistalling every color management program and rebooting
the system!

Might be an operating system/graphics driver issue (assuming 8 bit
table entries).

Graeme Gill.

Other related posts: