[argyllcms] Re: Manual calibration of external monitors
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 6 Aug 2018 12:04:25 +1000
Dale Powell wrote:
Hi,
I have come to Argyll from initially finding the DisplayCal front end, which
I couldn't
find a way to just display the reading being updated live, preferably with a
flat
reference level set as desired (D65 in my case.)
interactive calibration mode typically gives you this type of information.
So the closest I have found is to use your "spotread -T" command to give me
reading as I
run the command (or combine with watch to get it automatically updated.) At
least this
gives me a temperature reading but I would still consider it less than ideal.
I'm not clear what you are after. You can certainly do other measurements such
as absolute and white point relative XYZ and L*a*b* measurements using spotread.
But since it sounds like you really want to fiddle the display controls rather
than profile, perhaps something like HCFR is more what you are looking for:
<
https://sourceforge.net/projects/hcfr/>.
Cheers,
Graeme Gill.
Other related posts:
