[argyllcms] Re: Issues with CMYK printer profile (Profile all wrong)
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sat, 22 Nov 2014 13:14:53 +1100
Rodolfo Villanueva wrote:
> okay, i just re did the reading and the profile, and same result. This is a
> screenshot of the resulting profile.
>
> http://i.imgur.com/h8W5u3T.png
>
> As you can see, it's like it's missing a hole part of it.
>
> What could be going wrong?
As indicated by the poor profile fit report, you have bad readings.
You need to get a good set of readings before making and evaluating the
profile.
To figure out what patches are in error, use
profcheck -v2
and look for the largest delta E's.
(The next release has a profcheck -s option to make this easier).
It's likely that the problem patches are in a small number of strips.
Either re-read those strips, or read those strips patches one by one
using the chartread -p option.
Graeme Gill.
Other related posts:
