On Nov 21, 2014, at 10:55 AM, Rodolfo Villanueva <rvillanut@xxxxxxxxx> wrote: > All i can tell is that the avg error when creating the profile was 2.x, and > the max. error was 25 (pretty high apparently). The first thing to very strongly suspect is an error in measurement, possibly a strip read backwards or out of order or the like. Since it's not that many patches, the simplest thing to start with would be to just re-measure the chart. Use a slow, steady movement when scanning, and pay attention to the messages Argyll reports when doing so. If the problem persists, there're all sorts of additional things to try. Argyll's profcheck command, for example, will report the exact error for each patch; that would identify which patches are problematic. You could then re-measure just those patches, for example...but, again, for such a small chart, it'd likely be quicker to just re-measure the whole chart than to explain how to find and re-measure and edit and the like. b&
Attachment:
signature.asc
Description: Message signed with OpenPGP using GPGMail