[argyllcms] Re: Instrument Access Failed

  • From: Graeme Gill <graeme@xxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Sat, 01 Aug 2015 13:39:24 +1000

Lars-Daniel Weber wrote:

Hi,

While running "dispcal", I'm often getting communication errors... I don't
get these
when using i1match or other tools. The last 3-6 iteration steps take a
veeeery long
time. Is there some kind of timeout in the driver?

I don't know - I haven't seen that behavior.

Pressing "any other key" to retry breaks immediately. There's no second
change to
retry. Also, everything up to this point is lost. I can't restart "dispcal"
at the
point it stopped. That's very bad.

I'm not sure why that is - it's involved to test, since communication errors
don't
usually occur.

Anyone with an idea? Oh yeah, I'm running Windows 7 x64.

cmd-line: dispcal -v -qm -yl -t6500 -g2.2 -p.5,.5,2 20150801 version: 1.7.0

Add -D8 and capture the stderr to a file, i.e.:

dispcal -v -D8 -qm -yl -t6500 -g2.2 -p.5,.5,2 calfile 2> log.txt

and email me (i.e. NOT the list) the log.txt file of a failure.

Thanks,
Graeme Gill.

Other related posts: