[argyllcms] Re: I1 Display Pro not working in Argyll v1.3.4?

  • From: Steven Dobbelaere <steven.dobbelaere@xxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Wed, 14 Sep 2011 20:34:32 +0200

Alan, Pictus,

I thought it was not needed:

http://www.argyllcms.com/doc/Installing_MSWindows.html =>

"Note that the Huey and i1 Display Pro and ColorMunki Display colorimeter appears as an HID (USB Human Interface Device Class) device, and hence will be assigned to the default MSWindows HID driver, rather than popping a "New Hardware" dialog. You normally don't need to install an Argyll libusb1 driver for these devices."

But I will install the drivers to give it a try.


Op 9/14/2011 8:18 PM, Alan Goldhammer schreef:
I've not seen this type of error message in my use of the i1 Pro.  You don't
say whether you installed the Argyll device driver or not.  I know that this
is required for the i1 Pro to work with Argyll software (I assume the same
to be true for this one but could be wrong; for more details on hardware
see:  http://www.argyllcms.com/doc/Installing_MSWindows.html )


-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx]
On Behalf Of Steven Dobbelaere
Sent: Wednesday, September 14, 2011 2:05 PM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] I1 Display Pro not working in Argyll v1.3.4?


I'm a new user of Argyll, my first steps...
I'm trying to calibrate my monitor with my new I1 display pro.
The device is recognized in the i1profiler software but I can't get it
working in Argyll.
What am I doing wrong?

Check this movie to see that the device is recognized by windows and the
i1 profiler software:

Here is what I get in Argyll:

C:\Argyll_V1.3.4\bin>dispread -v -c 4 -y l f500
Number of patches = 836
Setting up the instrument
dispread: Error - icoms - usb_is_usb_portno: port number out of range!

C:\Argyll_V1.3.4\bin>dispcal -r
dispcal: Error - icoms - usb_is_usb_portno: port number out of range!

Monitor: HP LP2475w
OS: Windows 7 Home Premium / English


Other related posts: