[argyllcms] Re: I seem to be losing the installed LUT in X or someting along those lines. Help!
- From: "Martin (Lists)" <lists@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Tue, 27 Jul 2010 09:02:12 +0200
Am Montag, 26. Juli 2010 schrieb Leonard Evens:
> On Mon, 2010-07-26 at 15:54 -0500, Leonard Evens wrote:
> > I am running two systems.
> >
> > One is a 32 bit Fedora 12 system. I run
> >
> > dispwin -I xxx
> >
> > where xxx is the location of the desired profile. When I do this
> > the file .config/color.jcnf changes
> >
> > dispwin -L is in my .bash_profile
> >
> > Then I can logoff, shut the machine down, whatever and when I log
> > back in, the calibration is in X's LUT.
> >
> > Another is a 64 bit machine now running Fedora 13.
> >
> > When I do the same thing, I find after I'm back in that the
> > calibration has not been loaded. Moreover, the color.jcnf is
> > an old one from 2009, and
> > dispwin -L
> > tells me it failed to get the display's current ICC profile.
> >
> > I have to do dispwin -I over again.
> >
> > I also removed color.jcnf, and after I ran dispwin _I, it was not
> > created again, at least in .config.
> >
> > What is going on?
>
> The problem seems to be that on the Fedora 13 machine, dispwin -I
> doesn't seem to be creating a color.jcnf file.
Hallo
I had the same problem. Default fedora package failed on running
dispwin -L. The one compiled from original Argyll source run without a
problem. There seems to be a bug in the fedora package.
Martin
Other related posts:
