Hello I have a problem with "colprof -qh". When I do this I get a ICC Profil: colprof -v -C"Samuel Sinclair" -qm -S/Users/G5/ECI-RGB.V1.0.icc -cmt - dpp -kx /Users/G5/Ep11880_Moab_Colorado_Fiber_Satin_f2
But when I chance -qm to -qh I get this. (See below) What can I do? What is the problem? I work on a MacOSX 10.4.11 G5, 8GB RAM, 2x 2,5Ghz. Thank you.
G5:~ G5$ /Volumes/RAID-5/Argyll_V1.0.3/bin/colprof -v -C"Samuel Sinclair" -qh -S/Users/G5/ECI-RGB.V1.0.icc -cmt -dpp -kx /Users/G5/ Ep11880_Moab_Colorado_Fiber_Satin_f2
Total ink limit being used is 350% No black ink limit being used No of test patches = 3000 Estimating white pointApproximate White point XYZ = 0.860952 0.884959 0.795711, Lab = 95.369370 1.434847 -5.596507
Creating optimised per channel curvesInitial White Point XYZ 0.860952 0.884959 0.795711, Lab 95.369370 1.434847 -5.596507
About to optimise temporary matrix ..................... About to optimise input curves and matrix........................................................................ ........................................................................ ........................................................................ ........................................................................ ................................................
About to optimise output curves and matrix ......................... About to optimise input curves and matrix again ..................... About to optimise input, matrix and output together ...... About to adjust a and b output curves for white point About to create grid position input curves Create final clut from scattered data************************************************************************ ************************************************************************ ************************************************************************ ************************************************************************ ************************************************************************ ************************************************************************ ****************
Doing White point fine tune:Before fine tune, WP = XYZ 0.964926 1.000569 0.825058, Lab 100.021990 0.030716 0.025115 After fine tune, WP = XYZ 0.861594 0.885461 0.795864, Lab 95.390425 1.463750 -5.572820
Creating fast inverse input lookups Compensate scattered data for input curvesWhite point XYZ = 0.861594 0.885461 0.795864, Lab = 95.390425 1.463750 -5.572820
Find black point K only value (Lab) = 5.437635 0.478525 2.073447Black point XYZ = 0.007034 0.007168 0.004857, Lab = 6.475055 0.494712 1.993718
Done A to B table creation Setting up B to A table lookup Creating Gamut Mapping Finding Source Colorspace Perceptual Gamut Finding Source Colorspace Saturation Gamut Finding Destination Gamut Creating Gamut match Gamut Mapping Specification: Description = ' p - Perceptual (Preferred) [ICC Perceptual]' Closest ICC intent = 'Perceptual' Using Color Apperance Space Using Mapping with parameters: Grey axis alignment factor 1.000000 Grey axis white compression factor 1.000000 Grey axis white expansion factor 1.000000 Grey axis black compression factor 1.000000 Grey axis black expansion factor 1.000000 Grey axis knee factor 1.000000 Gamut compression factor 1.000000 Gamut expansion factor 0.000000 Gamut knee factor 0.500000 Gamut Perceptual mapping weighting factor 1.000000 Gamut Saturation mapping weighting factor 0.000000 Saturation enhancement factor 0.000000 Gamut map resolution: 33 Neutral axis no-adapt extend and bendSrc colorspace white/black are 99.999877 -0.743921 1.806453, 11.485572 -0.247977 0.602159 Src gamut white/black are 99.999877 -0.743921 1.806453, 11.485572 -0.247977 0.602159 Dst colorspace white/black are 100.000000 -0.599603 1.014908, 10.599221 0.305106 2.394504 Target (blended) dst wp/bp = 100.000000 -0.599603 1.014908, 10.599221 0.305106 2.394504 Adapted target wp/bp = 100.000000 -0.599603 1.014908, 9.771493 -0.224248 0.501405 Adapted & extended tgt wp/bp = 100.000000 -0.599603 1.014908, 9.771493 -0.224248 0.501405 Bend target bp = 10.599221 0.305106 2.394504 Rotate matrix src wp/bp = 100.000000 -0.743922 1.806455, 9.779018 -0.238415 0.578940 Rotate matrix dst wp/bp = 100.000000 -0.599603 1.014908, 9.771493 -0.224248 0.501405 Rotated source grey axis wp/bp 99.999877 -0.599602 1.014908, 11.478190 -0.231348 0.511118 Rotated gamut grey axis wp/bp 99.999877 -0.599602 1.014908, 11.478190 -0.231348 0.511118 Destination axis target wp/bp 100.000000 -0.599603 1.014908, 9.771493 -0.224248 0.501405 Mapped source grey axis wp/bp 99.981080 -0.599524 1.014801, 9.872701 -0.224669 0.501981
Optimizing source to destination mapping... .............. Gamut hull mapping errors: = avg 2.459591, max 10.329814White is 99.833720 -0.344997 1.224453, should be 100.000000 -0.599603 1.014908
Black is 9.817658 0.058029 1.392138, ideal is 9.771493 0.313483 2.407278 After fine tuning:White is 99.999999 -0.599603 1.014908, should be 100.000000 -0.599603 1.014908
Black is 9.817658 0.058029 1.392138, ideal is 9.771493 0.313483 2.407278 Gamut Mapping Specification: Description = ' s - Enhanced Saturation [ICC Saturation]' Closest ICC intent = 'Saturation' Using Color Apperance Space Using Mapping with parameters: Grey axis alignment factor 1.000000 Grey axis white compression factor 1.000000 Grey axis white expansion factor 1.000000 Grey axis black compression factor 1.000000 Grey axis black expansion factor 1.000000 Grey axis knee factor 1.000000 Gamut compression factor 0.900000 Gamut expansion factor 1.300000 Gamut knee factor 1.000000 Gamut Perceptual mapping weighting factor 0.000000 Gamut Saturation mapping weighting factor 1.000000 Saturation enhancement factor 0.800000 Gamut map resolution: 33 Neutral axis no-adapt extend and bendSrc colorspace white/black are 99.999877 -0.743921 1.806453, 11.485572 -0.247977 0.602159 Src gamut white/black are 99.999877 -0.743921 1.806453, 11.485572 -0.247977 0.602159 Dst colorspace white/black are 100.000000 -0.599603 1.014908, 10.599221 0.305106 2.394504 Target (blended) dst wp/bp = 100.000000 -0.599603 1.014908, 10.599221 0.305106 2.394504 Adapted target wp/bp = 100.000000 -0.599603 1.014908, 9.771493 -0.224248 0.501405 Adapted & extended tgt wp/bp = 100.000000 -0.599603 1.014908, 9.771493 -0.224248 0.501405 Bend target bp = 10.599221 0.305106 2.394504 Rotate matrix src wp/bp = 100.000000 -0.743922 1.806455, 9.779018 -0.238415 0.578940 Rotate matrix dst wp/bp = 100.000000 -0.599603 1.014908, 9.771493 -0.224248 0.501405 Rotated source grey axis wp/bp 99.999877 -0.599602 1.014908, 11.478190 -0.231348 0.511118 Rotated gamut grey axis wp/bp 99.999877 -0.599602 1.014908, 11.478190 -0.231348 0.511118 Destination axis target wp/bp 100.000000 -0.599603 1.014908, 9.771493 -0.224248 0.501405 Mapped source grey axis wp/bp 99.981080 -0.599524 1.014801, 9.872701 -0.224669 0.501981
Optimizing source to destination mapping... ........... Gamut hull mapping errors: = avg 4.052452, max 20.971568White is 99.525784 -0.808008 1.058817, should be 100.000000 -0.599603 1.014908
Black is 9.755408 0.126747 1.480625, ideal is 9.771493 0.313483 2.407278 After fine tuning:White is 99.999998 -0.599603 1.014908, should be 100.000000 -0.599603 1.014908
Black is 9.755408 0.126747 1.480625, ideal is 9.771493 0.313483 2.407278 Creating B to A tables Rev cache RAM = 2770 Mbytes There is 1 rev cache instance with 2770 Mbytes limit4%colprof(16553) malloc: *** vm_allocate(size=8421376) failed (error code=3)
colprof(16553) malloc: *** error: can't allocate region colprof(16553) malloc: *** set a breakpoint in szone_error to debug/Volumes/RAID-5/Argyll_V1.0.3/bin/colprof: Error - rspl malloc failed - reverse cell simplexes - base simplex