Am 31.07.07, 14:53 +0200 schrieb Lars Tore Gustavsen: > Since the media type set a basic setting, I also wonder if Gerhard > have right here. If so where can I find a target for ink limiting? > Either a cube or another type. I have not found anything with Google. > I also wonder what to print for the saturation test mentioned by > Kai-Uwe Behrmann. You could use the Cmyk ramp tiff from the following site: http://colorremedies.com/realworldcolor/downloads/ When your test page, can be pretty small, comes out of the printer, all colour patches should be almost dry. > And Kai-Uwe if I use the -c parametre to targen and read the cmyk > profile you have made as a input, I get an ink limt of 371%. Maybe > that is a nice starting point even though your profile is for gloss > paper and I am trying to profile luster paper? 350-370 should be fine. > This is harder than I thought. I think it's time now to pickup a book > about color management. kind regards Kai-Uwe Behrmann -- developing for colour management www.behrmann.name + www.oyranos.org + www.cinepaint.org