On 5 March 2010 12:02, Graeme Gill <graeme@xxxxxxxxxxxxx> wrote: > See <http://www.argyllcms.com/munki_imp.c>, > and (probably) using -D will be sufficient to get > the desired messaged. Log file attached. Thanks. Richard.
usb_get_paths about to look through buses: usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x971, PID 0x2007 usb_check_and_add() found known instrument usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x483, PID 0x2016 usb_check_and_add() called with VID 0xa5c, PID 0x2110 usb_check_and_add() called with VID 0x1d6b, PID 0x1 usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x46d, PID 0xc50e usb_check_and_add() called with VID 0x403, PID 0x6001 usb_check_and_add() called with VID 0x463, PID 0xffff usb_check_and_add() called with VID 0x409, PID 0x58 usb_check_and_add() called with VID 0x1d6b, PID 0x2 usb_get_paths about to look through devices: usb_check_and_add() called with VID 0x1d6b, PID 0x2 failed to open serial "/dev/ttyUSB0" failed to open serial "/dev/ttyS3" failed to open serial "/dev/ttyS2" failed to open serial "/dev/ttyS1" failed to open serial "/dev/ttyS0" munki: About to init coms munki: About to init USB icoms: About to set usb port characteristics icoms: About to open the USB port icoms: USB port needs opening icoms: About to open USB port 'usb:/bus0/dev2 (X-Rite ColorMunki)' icoms: USB port is now open icoms: Clearing any USB errors icoms: usb port characteristics set ok munki: init coms has suceeded munki: About to init instrument munki: GetFirmParms GetFirmParms returns fwrev 1.32, tickdur 32, minint 224, eeblks 2, eeblksz 8192 ICOM err 0x0 munki: GetChipID GetChipID returns 01-52706812000099 ICOM err 0x0 munki: GetVersionString GetVersionString returns 'colormunki FW V1.32 Build Nr. 1303' ICOM err 0x0 munki: Read EEProm address 0x4 size 0x4 Read 0x4 bytes, ICOM err 0x0 munki: Read EEProm address 0x0 size 0x1fe9 Read 0x1fe9 bytes, ICOM err 0x0 Normal non-lin = 0.000000 1.009044 -0.000001 0.000000 High Gain non-lin = 0.000000 0.207241 -0.000001 0.000000 munki: SetIndLED 1000, 0, 0, -1, 0, 0xfaa86bd SetIndLED got ICOM err 0x0 munki: SetIndLED 0, 0, 0, 0, 0, 0x00 SetIndLED got ICOM err 0x0 inst_handle_calibrate called About to call calibrate at top of loop munki: GetStatus GetStatus Sensor pos. Calibration, Button state Released, ICOM err 0x0 Set instrument sensor to calibration position, and then hit any key to continue, or hit Esc or Q to abort:About to call calibrate at top of loop munki: GetStatus GetStatus Sensor pos. Calibration, Button state Released, ICOM err 0x0 munki: TriggerMeasure lamp 0, scan 0, gain 0, intclks 224, nummeas 70, 0x437a3c TriggerMeasure got ICOM err 0x0 munki: Read measurement results: inummeas 70, scanflag 0, address 0x8aa0210 bsize 0x4aec about to call usb_read with 19180 bytes Read 70 readings, ICOM err 0x0 (Trig & rd times 0 0 527 0) Execution time of dark calib time 0.007168 sec = 528 msec munki: TriggerMeasure lamp 1, scan 0, gain 0, intclks 379, nummeas 83, 0x80a7319 TriggerMeasure got ICOM err 0x0 munki: Read measurement results: inummeas 83, scanflag 0, address 0x8aa0210 bsize 0x58d6 about to call usb_read with 22742 bytes Read 83 readings, ICOM err 0x0 (Trig & rd times 0 1 1046 1) Doing a white calibration with opt int_time 0.007168, gainmode 0 munki: TriggerMeasure lamp 1, scan 0, gain 0, intclks 224, nummeas 84, 0x5b4560 TriggerMeasure got ICOM err 0x0 munki: Read measurement results: inummeas 84, scanflag 0, address 0x8aa0210 bsize 0x59e8 about to call usb_read with 23016 bytes Read 84 readings, ICOM err 0x0 (Trig & rd times 0 1 629 1) Needed scale is 0.856438 Current scale = 0.856438 Doing a white calibration with opt int_time 0.007168, gainmode 0 munki: TriggerMeasure lamp 1, scan 0, gain 0, intclks 224, nummeas 84, 0x11808 TriggerMeasure got ICOM err 0x0 munki: Read measurement results: inummeas 84, scanflag 0, address 0x8aa0210 bsize 0x59e8 about to call usb_read with 23016 bytes Read 84 readings, ICOM err 0x0 (Trig & rd times 1 1 628 1) Needed scale is 0.856438 Current scale = 0.856438 Doing a white calibration with opt int_time 0.007168, gainmode 0 munki: TriggerMeasure lamp 1, scan 0, gain 0, intclks 224, nummeas 84, 0x11808 TriggerMeasure got ICOM err 0x0 munki: Read measurement results: inummeas 84, scanflag 0, address 0x8aa0210 bsize 0x59e8 about to call usb_read with 23016 bytes Read 84 readings, ICOM err 0x0 (Trig & rd times 0 1 629 1) Needed scale is 0.856745 Current scale = 0.856745 Doing a white calibration with opt int_time 0.007168, gainmode 0 munki: TriggerMeasure lamp 1, scan 0, gain 0, intclks 224, nummeas 84, 0x11808 TriggerMeasure got ICOM err 0x0 munki: Read measurement results: inummeas 84, scanflag 0, address 0x8aa0210 bsize 0x59e8 about to call usb_read with 23016 bytes Read 84 readings, ICOM err 0x0 (Trig & rd times 2 0 627 0) Needed scale is 0.857360 Current scale = 0.857360 Doing a white calibration with opt int_time 0.007168, gainmode 0 munki: TriggerMeasure lamp 1, scan 0, gain 0, intclks 224, nummeas 84, 0x11808 TriggerMeasure got ICOM err 0x0 munki: Read measurement results: inummeas 84, scanflag 0, address 0x8aa0210 bsize 0x59e8 about to call usb_read with 23016 bytes Read 84 readings, ICOM err 0x0 (Trig & rd times 1 0 629 0) Needed scale is 0.857360 Current scale = 0.857360 Doing a white calibration with opt int_time 0.007168, gainmode 0 munki: TriggerMeasure lamp 1, scan 0, gain 0, intclks 224, nummeas 84, 0x11808 TriggerMeasure got ICOM err 0x0 munki: Read measurement results: inummeas 84, scanflag 0, address 0x8aa0210 bsize 0x59e8 about to call usb_read with 23016 bytes Read 84 readings, ICOM err 0x0 (Trig & rd times 1 0 629 0) Needed scale is 0.857667 Current scale = 0.857667 White calibration failed - didn't converge (0.909091 0.857667 1.111111) usb_close_port() called Calibration failed with 'Measurement misread' (White reference calibration didn't converge) Hit any key to retry, or Esc or Q to abort: