[argyllcms] Re: FWA Compensation

  • From: Graeme Gill <graeme@xxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Wed, 10 Dec 2014 22:08:45 +1100

robert@xxxxxxxxxxxxxxxxxx wrote:

Hi,

> As you are doing a new release, I don't suppose you would be able to add an
> option for the i1Pro2 to measure UV on / off for spotread?

No, that's a major amount of work, and I don't see having time
for it at the moment.

> i1Profiler has
> this feature and it's very useful to get an estimate of how much FWA is in
> the paper (for example, with a particular paper the b* reading is -15 with
> UV and -4 without ... which gives a good indication of very high FWA
> content).  [Also, by looking at the a* reading too it gives an idea of the
> extent of the color shift due to the FWA. In the case of this particular
> paper b* went from 3 with UV to 0.5 without, so quite a magenta tint caused
> by the UV].

Argyll already supports M0, M1 & M2 with the i1pro & i1pro2, as well as the
more general FWA compensated readings. You don't need the UV on/off reading
to do this.

Graeme Gill.



Other related posts: