Default i1 8 mm patch size is not good for ColorMunki. Use 8.26 mm row width: ColoMunki width is 41.3 mm, 41.3 / 5 = 8.26, so you can read target with ruler Just add to printarg "-a 1.0325" that scale i1 row to 8.26 mm (8*1.0325=8.26). 2014-01-31 Todd Sailor <mfdisme@xxxxxxxxx>: > That seemed to have worked. I did tweak the -p value to 330x482. > > It took a bit with Adobe Color Printer Utility, but scaling at 97% got it > all on one page. > > Thanks! > > > On Jan 30, 2014, at 5:59 PM, BC Rider <bcrider99@xxxxxxxxxxx> wrote: > > >> However, I still need some help filling up an A3+ (13"x19") sheet with > patches. I have a ColorMunki and I understand 8mm is an acceptable minimum > size. I would like to fill a page or two with patches at this size. > >> > >> Could someone walk me through the targen string, or provide it? > >> > > > > What printtarg string are you using? The following will support 1748 > patches assuming I have the A3+ size correct: > > > > printtarg -v -iCM -h -a0.6 -t360 -p333x482 testname > > > > Given that, targen just needs to produce a 1748 patch target: > > > > targen -v -d2 -G -f1748 testname > > > > Be sure to measure your printed target to check for unexpected scaling > problems. Suggest scanning with a double-sided ruler (search archives for > discussion of this) with 8.22mm patch size (measure 10 rows and divide by > 10). > > >