[argyllcms] Re: Dispcalgui and "Measure" buttons

  • From: Florian Höch <lists+argyllcms@xxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Mon, 21 Jun 2010 16:05:42 +0200

Hi,

thanks for the report. If you click "measure", does it ask you to do the sensor calibration?

Regards

Am 21.06.2010 06:45, schrieb Jari Jylhä:
Measure buttons don't work with Colormunki Photo. Dipcalgui waits 30
seconds and then says "Error".

Debian Lenny 64-bit
Argyll 1.1.1 compiled from source
Dispcalgui 0.3.3.9 installed with autopackage

Spotread works on command line.

Here is dispcalGUI.log

2010-06-21 07:21:20,753
===============================================================================

=
2010-06-21 07:21:20,814 Starting up...
2010-06-21 07:21:20,817 Enumerating display devices and communication
ports...
2010-06-21 07:21:21,019 ...ok.
2010-06-21 07:21:21,020 Checking video card gamma table access for
display 1...
2010-06-21 07:21:21,062 XRandR 1.2 is faulty - falling back to older
extensions
2010-06-21 07:21:21,070 XRandR 1.2 is faulty - falling back to older
extensions
2010-06-21 07:21:21,071 Verify: 'test.cal' IS loaded (discrepancy 0.2%)
2010-06-21 07:21:21,110 XRandR 1.2 is faulty - falling back to older
extensions
2010-06-21 07:21:21,110 ...ok.
2010-06-21 07:21:21,111 Initializing GUI...
2010-06-21 07:21:22,083 ...ok.
2010-06-21 07:21:22,513 Loading calibration curves of current display
device profile...
2010-06-21 07:21:22,544 XRandR 1.2 is faulty - falling back to older
extensions
2010-06-21 07:21:22,544 About to open dispwin object on the display
2010-06-21 07:21:22,545 About to clear the calibration
2010-06-21 07:21:22,545 About to set display to given calibration
2010-06-21 07:21:22,545 Calibration set
2010-06-21 07:21:22,545 About to destroy dispwin object
2010-06-21 07:21:22,545 ...ok.
2010-06-21 07:21:22,546 Ready.
2010-06-21 07:22:09,400 Timeout exceeded in read_nonblocking().
2010-06-21 07:22:09,401 <dispcalGUI.wexpect.spawn_unix object at 0x16e70d0>
2010-06-21 07:22:09,401 version: 2.3 ($Revision: 399 $)
2010-06-21 07:22:09,401 command: /usr/local/lib/Argyll_V1.1.1/bin/spotread
2010-06-21 07:22:09,401 args:
[u'/usr/local/lib/Argyll_V1.1.1/bin/spotread', '-v', '-c1', '-a', '-x']
2010-06-21 07:22:09,401 searcher: searcher_re:
2010-06-21 07:22:09,401 0: re.compile("Hit ESC or Q to exit, any other
key to take a reading:")
2010-06-21 07:22:09,402 buffer (last 100 chars): ment sensor to
calibration position,
2010-06-21 07:22:09,402 and then hit any key to continue,
2010-06-21 07:22:09,402 or hit Esc or Q to abort:
2010-06-21 07:22:09,402 before (last 100 chars): ment sensor to
calibration position,
2010-06-21 07:22:09,402 and then hit any key to continue,
2010-06-21 07:22:09,402 or hit Esc or Q to abort:
2010-06-21 07:22:09,402 after: <class 'dispcalGUI.wexpect.TIMEOUT'>
2010-06-21 07:22:09,403 match: None
2010-06-21 07:22:09,403 match_index: None
2010-06-21 07:22:09,403 exitstatus: None
2010-06-21 07:22:09,403 flag_eof: False
2010-06-21 07:22:09,403 pid: 13247
2010-06-21 07:22:09,403 child_fd: 7
2010-06-21 07:22:09,404 closed: False
2010-06-21 07:22:09,404 timeout: 30
2010-06-21 07:22:09,404 delimiter: <class 'dispcalGUI.wexpect.EOF'>
2010-06-21 07:22:09,404 logfile: None
2010-06-21 07:22:09,404 logfile_read: None
2010-06-21 07:22:09,404 logfile_send: None
2010-06-21 07:22:09,404 maxread: 2000
2010-06-21 07:22:09,405 ignorecase: False
2010-06-21 07:22:09,405 searchwindowsize: None
2010-06-21 07:22:09,405 delaybeforesend: 0.05
2010-06-21 07:22:09,405 delayafterclose: 0.1
2010-06-21 07:22:09,405 delayafterterminate: 0.1


--
Florian Höch
http://hoech.net


Other related posts: