[argyllcms] DispcalGui and Spyder3

  • From: Hugo Meinedo <hugo.meinedo@xxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Tue, 13 Jul 2010 15:44:25 +0100

Dear Florian,

I've tried to use a Spyder3 with dispcalGUI and ArgyllCMS v1.1.1 in Mac 
OS X 10.6.4 but dispcalGUI gets stuck during the instrument setup phase.
In the old version, the one with a terminal window, it was necessary to press 
"any key" to proceed. In this newer version,
the terminal window does not appear and my guess is that dispcal is waiting for 
the "any key" to be pressed.
I opened a terminal and run dispcal,

/Applications/Argyll_V1.1.1/bin/dispcal -v2 -d1 -c1 -yl  -R

and it works ok.

Best regards,
Hugo Meinedo

Other related posts: