[argyllcms] Re: DispcalGUI problem

  • From: "Marco N." <manold@xxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Sun, 20 Jun 2010 14:50:41 +0200

I have tried to use two step, calibration only and then profile only (but not 
in optimal condition due to day lightness in the room and low quality 
calibration setting). It seem that the results are much better and correct. 
This evening I try again and I report to you. For now thank you.

Ciao
Marco


Il giorno 20/giu/2010, alle ore 14.33, Roger Breton ha scritto:

> Yeah, good idea. Try profiling alone. Just to see what kind of results you 
> get.
>  
> / Roger
>  
> From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx] 
> On Behalf Of Martin Sivak
> Sent: 20 juin 2010 07:55
> To: argyllcms@xxxxxxxxxxxxx
> Subject: [argyllcms] Re: DispcalGUI problem
>  
> Hi,
>  
> I noticed that also. When you stop after calibration and request profiling 
> only, does it return correct results? Or just try doing calibration and 
> profiling in two steps.
>  
> It seems to me that dispcalGUI tries to send the key to make the whole 
> calibration/profiling sequence unattended, but since dispcal requests another 
> device calibration it accidentally calibrates the instrument with gray patch 
> from the display. 
>  
> Martin Sivak
>  
> On 20.6.2010, at 11:17, Marco N. wrote:
> 
> 
> I have tried many times with a lot of interface set up, the luminance is 
> always on maximal (I have tweak it in the Mac preferences to 120 cd/m2)
>  
> I have a strong double. After the calibration the instrument requests the 
> second internal calibration. This internal calibration is carried out by the 
> software automatically on display ( and then I have to push a key to perform 
> the color measurement) 
>  
> Place cap on the instrument, or place in on a dark surface,
> or place on the white calibration reference,
>  and then hit any key to continue,
>  or hit Esc or Q to abort:
>  Calibration complete
>  
> Is it normal? I have the double that the instruments calibrates itself on the 
> white of display and takes the measurements incorrectly ... 
>  
> Thank you 
> Marco
>  
>  
>  
> Il giorno 20/giu/2010, alle ore 10.38, Marco N. ha scritto:
> 
> 
> Is there a luminance auto adjustment? Where?
>  
> Thank you everybody
> Marco
>  
> Il giorno 20/giu/2010, alle ore 10.14, Fabrizio Levati ha scritto:
> 
> I know it sounds like a dumb question but, is the luminance auto adjustment 
> turned off?
> 
> Cheers
> Fabrizio
> 
>  
>  
>  

Other related posts: