[argyllcms] Re: DTP94 problem
- From: Fabrizio Levati <fabrizio.levati@xxxxxxxxxxxxxx>
- To: <argyllcms@xxxxxxxxxxxxx>
- Date: Wed, 01 Dec 2010 17:24:14 +0100
"Graeme Gill" <graeme@xxxxxxxxxxxxx> wrote:
> What about trying it with X-Rites ToolCrib ?
Graeme,
Finally I managed to measure three patches (just the primaries), in the same
screen position and without moving the colorimeter between measurements both
with Toolcrib and Quato iColor.
Here are the results
ToolCrib iColor
R 144.62 75.0 3.71 143.9 74.7 3.7
G 85.52 172.51 23.13 85.4 172.3 23.1
B 35.52 17.02 183.66 35.5 17.0 183.6
Now the question is: is this enough to think the colorimeter is working
properly? Since I doubt that, do you know of any command that I can run in
ToolCrib shell to test the instrument? As far as I can see, nothing seems to
indicate malfunctioning in ToolCrib...
Fabrizio
Other related posts:
