[argyllcms] Re: DTP41 - is it useful?

  • From: Ben Goren <ben@xxxxxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Tue, 19 Dec 2017 17:19:03 -0700

...and the ruler isn't anything magical, but simply a piece of plastic with a 
long hole the width of the bottom aperture. You cold probably kludge something 
just fine with stuff around your office. If you've any fabrication skills -- a 
router with wood, 3D plastic printing, machining / CNC of metal, whatever -- 
it'd be trivial to make something elegant.

b&

On Dec 19, 2017, at 5:06 PM, edmund ronald <edmundronald@xxxxxxxxx> wrote:

i know this isn't what you want to hear, but I would just print a larger set 
of patches and do spot measurements with the i1. 
or maybe what you want is simply this: 
https://www.ebay.com/itm/Densitometre-X-Rite-i1-Pro-Densitometer/263342850745?rt=nc&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D41376%26meid%3D9b9b3163484c4d779d0ae2cc4b3e6fb7%26pid%3D100005%26rk%3D1%26rkt%3D1%26sd%3D172901035694&_trksid=p2047675.c100005.m1851
Edmund


On Tue, Dec 19, 2017 at 7:49 PM, Lars-Daniel Weber <Lars-Daniel.Weber@xxxxxx> 
wrote:
Hi there!

I've got an i1 Pro Rev. B, which got re-certificated two months ago.
My problem: I don't have a ruler and all the "hacks" with DIY aren't working 
pretty good.

On eBay, you can find pretty cheap DTP41... are they useful for printer 
profiling?
Sure, they need re-recertification, but that's easier to get than a 
measurement ruler ;)

Best regards,
Lars-Daniel




Other related posts: