Bob Coss wrote: > For the first time I've tried profiling 4x6 inch paper, and I'm getting > error messages like this when I try to read the header. Hi, by "header" do you mean TID ? I think the problem is the label text. The target guide says "Strip numeration can be contained within the white area of the Start Bit but must be of small font and printed using the identical CMY proportions", but this seems to be wrong, as even when I made the text grey and very small (3mm), it still stopped it working for many rows. I'll change it to 2mm, but it does seem to help to read it backwards. You could try erasing or dimming the text in the .tif file before printing, or whiting it out on the print, to see if that works around the problem. Graeme Gill.