[argyllcms] Re: DIY probe
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Thu, 23 Aug 2007 10:13:56 +1000
Frédéric wrote:
Ok, I compiled of http://www.argyllcms.com/argyll_dev_src.zip successfully
(is this the beta you where talking about? dispread version is 0.70
BETA4).
If you're using an unmodified HCFR, you probably want to change
the calibration matrices appropriately - see about
line 327 and 392 in hcfr.c. This only affects the brightness
calibration.
How do I use 'dispread' to work with the HCFR probe?
The same as any other colorimeter instrument.
See <http://www.argyllcms.com/doc/Scenarios.html>
and <http://www.argyllcms.com/doc/dispread.html>
or the equivalent provided with the source.
Graeme Gill.
Other related posts:
