[argyllcms] Re: Convert D50 ti3 file to A ti3 file

  • From: "Mike Tough" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "mike.tough" for DMARC)
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Fri, 27 Oct 2017 15:33:23 +0100

Graeme - Unfortunately txt2ti3 does not work either :( Guess I'll just have
to do it by hand (doesn't look too tricky :) ). Thanks again for your
assistance.

Alexey - Many thanks for taking the time to do this. It does give me a file
that works with spec2cie and that I can experiment with. Most helpful.

Regards

Mike



On 24 October 2017 at 08:41, Alexey Gribunin <Gribunin@xxxxxxx> wrote:

Hello Mike!

The CXF file supplies by Coloraid is in CXF v.1 format.
So it can be easily opened using Xrite MeasureTool (please take a look at
the screenshot) and saved to TXT.
In attachment you will find both spectral TXT file and spectral ti3 file
converted from this TXT.

Best regards,
Alexey Gribunin, UNIT Color Technologies, Moscow, Russia.

On 24/10/2017 05:40, Mike Tough (Redacted sender mike.tough for DMARC)
wrote:

Thanks again Graeme,

I had tried that (and have double checked) but unfortunately it gives the
following error:

argyll: Error - Input file isn't a CTI3 or SPECT format file

I guess the .cgt file from Coloraid is not compatible with spec2cie.

Do you have a spec for the input format required? Perhaps I could edit
the .cgt to suit spec2cie's requirements.

Any other suggestions?

Ta

Mike



<http://www.avg.com/email-signature?utm_medium=email&utm_
source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free. www.avg.com <http://www.avg.com/email-sign
ature?utm_medium=email&utm_source=link&utm_campaign=sig-
email&utm_content=webmail>

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On 24 October 2017 at 01:46, Graeme Gill <graeme@xxxxxxxxxxxxx <mailto:
graeme@xxxxxxxxxxxxx>> wrote:

    Mike Tough (Redacted sender mike.tough for DMARC) wrote:

    Hi,

    > When using the .cgt file from Coloraid (which does include spectral
data) as input to
     > scanin, scanin _will_ produce a .ti3 file, but the spectral data
    is not transferred to the
    > .ti3 file and, again, spec2cie fails.
    >
    > Am I missing something?

    yes, you need to use the tools in the other order. Use spec2cie on
    the reference
    data (.cgt), and then use the resulting CIE values with scanin.

    Cheers,

    Graeme Gill.



Other related posts: