[argyllcms] Re: Collink: DeviceLinkProfile for proofing purpose

  • From: Michael Schulz <ms.typografik@xxxxxx>
  • To: <argyllcms@xxxxxxxxxxxxx>
  • Date: Wed, 16 Sep 2009 19:21:34 +0200

Hello Martin,

again you helped me! Thanks a lot. I was completely wrong by using the -G
flag. With your command line it looks much better. Too red a bit, but this
might depend on the black ink generation. First I'll try different black
generation sets and will come back for this subject.

Michael Schulz


Am 15.09.2009 11:09 Uhr schrieb "Martin Weberg" unter
<martin.weberg@xxxxxxxxx>:

> Hi Michael!
> 
> I have done lots of refining to proofer profiles, but not using device
> links. It would be great if you provided all your commands from
> building profiles and abstract profiles. And what commands you tried
> so far. The problem could be other than collink.
> 
> Simple mode assuming absolute colorimetric proof (getting the black
> generation of the proofer profile):
> collink -pfix1.icc -s -ia -oa ISOcoated_v2.icc ProofPrinter.icc DL.icc
> 
> Then, you might try using different K generations. Preferably much and
> pure K, minimizing metameri effects and bleeding of black text, but it
> depends.
> 
> Martin Weberg



Other related posts: