[argyllcms] Re: Chartread host initiated i1 strip reading
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Tue, 25 Jun 2019 22:20:01 +1000
Brandon Bates wrote:
Before I go digging into code, is there a way to initiate a strip read (aka
press and hold
the button) in chartread? (For example press ctrl-b to begin and ctrl-e to
end, with a 10
second timeout or something)
Short answer is no. The instrument itself uses the button to
start and stop the data stream.
There may be ways around this by setting up a very long transfer and
aborting it somehow, but it would need some amount of
extra code in the i1pro driver to try this approach out and see if
it would work.
Cheers,
Graeme Gill.
Other related posts:
