[argyllcms] Re: Can't change number of patches on chart
- From: Phil Cruse <pcruse@xxxxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 12 Jul 2010 16:00:30 +0100
Hi Graeme,
Many thanks. All OK now after cutting /pasting command from your reply. Must be
finger trouble!
Platform is Intel Mac/OSX Snow Leopard 10.6.4/ V1.1.1 /Intel binary downloaded
from Argyll,
also tried on Mac PowerBook G4/10.4.11/appropriate PPC binary
Cheers,
Phil
On 12 Jul 2010, at 14:57, Graeme Gill wrote:
> Phil Cruse wrote:
>> targen -v -d4 -l260 -f1500 PrinterB
>> CMYK test chart
>> Full spread patches = 836
>> Adaptation weights: Device = 0.935, Perceptual = 0.065Perceptual cache
>> resolution = 7
>> Acceleration grid res = 6
>> There are 1 unique fixed points to add (4 non-unique)
>> There are 832 far spread points to add
>> Added 833/833
>
> What version and platform are you on ? Did you download the binaries from
> the Argyll website ?
>
> Using the current V1.1.1, I get the following:
>
> /src/Argyll_V1.1.1/target:targen -v -d4 -l260 -f1500 PrinterB
> CMYK test chart
> Full spread patches = 1500
> Ink limit = 260.0% (underlying 260.0%)
> Adaptation weights: Device = 0.935, Perceptual = 0.065, Curvature = 0.010
> Perceptual cache resolution = 7
> Acceleration grid res = 7
>
> There are 1 unique fixed points to add (4 non-unique)
> There are 1496 far spread points to add
> Added 1497/1497
> After seeding points: MinPoint = 13.776, Min = 6.888, Avg. = 14.262, Max =
> 16.955, 17.4 secs
> Re-seeding
>
> etc.
>
> Graeme Gill.
>
>
Other related posts:
