[argyllcms] Re: CM-700d device for printer profiling

  • From: Graeme Gill <graeme@xxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Sat, 31 Mar 2018 11:18:25 +1100

Alexey Gribunin wrote:

I think - basically yes, it's quite useless.
Mainly because all standard profiles are made with 0/45.

Hi,
        in general yes, because typically you are making ICC profiles
to manage color appearance, not colorant content.

But 0/45 and d/8 should agree pretty well for highly matte
surfaces and d/8 with specular excluded should be closer to
0/45 for glossy surfaces. So if your printer output is matte,
or if you use d/8 specular excluded you may get something closer
to an acceptable looking result, but it isn't going to meet 0/45
targets, nor will the appearance exactly match that of a 0/45 profile.

Cheers,

Graeme Gill.


Other related posts: