[argyllcms] Re: Awful result with Argyll 1.3.5 + dispcalGUI 0.8 + i1Display Pro & Dell U2711 :-(((
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 16 Jan 2012 11:32:34 +1100
Paolo Avezzano wrote:
> I do set RGB sliders since the very first attempt. The two software read
> light data in different ways.
> It seems I'll have to set a standard for a single solutions between the two.
I think that hints at a fundamental problem in your setup then. There should be
good agreement between the readings, if the same instrument is being used.
Graeme Gill.
Other related posts:
