09.03.2013 16:18, Boris Samorodov пишет: > The device had been detected with previous versions something > like /dev/usb/12 or /dev/usb12. Here is the relevant part: ----- ./dispcal -D6 Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Unable to intern atom 'EDID_DATA' Got EDID for display usb_get_paths: about to look through busses: usb_get_paths: about to look through devices: usb_check_and_add: called with VID 0x971, PID 0x2000 usb_check_and_add: found known instrument VID 0x971, PID 0x2000 usb_check_and_add: called with VID 0x45e, PID 0x84 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x4b8, PID 0x11c usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x93a, PID 0x2700 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized Calibrate a Display, Version 1.5.1_beta Author: Graeme W. Gill, licensed under the AGPL Version 3 etup_spyd2: failed to find PLD file Diagnostic: Output filname parameter not found usage: dispcal [options] outfile -v [n] Verbose mode -display displayname Choose X11 display name -d n[,m] Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Unable to intern atom 'EDID_DATA' Got EDID for display 1 = 'Screen 1, Output DVI-I-1 at 0, 0, width 1920, height 1080' -dweb[:port] Display via a web server at port (default 8080) -c listno Set communication port from the following list (default 1) usb_get_paths: about to look through busses: usb_get_paths: about to look through devices: usb_check_and_add: called with VID 0x971, PID 0x2000 usb_check_and_add: found known instrument VID 0x971, PID 0x2000 usb_check_and_add: called with VID 0x45e, PID 0x84 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x4b8, PID 0x11c usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x93a, PID 0x2700 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized usb_check_and_add: called with VID 0x0, PID 0x0 usb_check_and_add: device not reconized 1 = 'usb:/bus0/dev12 (GretagMacbeth i1 Pro)' 2 = '/dev/cuau0' -r Report on the calibrated display then exit -R Report on the uncalibrated display then exit [...] ----- -- WBR, Boris Samorodov (bsam) FreeBSD Committer, http://www.FreeBSD.org The Power To Serve