[argyllcms] Re: ArgyllCMS V1.1.0 RC1 is now available

  • From: "Gerhard Fürnkranz" <nospam456@xxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Mon, 09 Nov 2009 20:19:48 +0100

-------- Original-Nachricht --------
> Datum: Mon, 09 Nov 2009 18:31:01 +1100
> Von: Graeme Gill <graeme@xxxxxxxxxxxxx>
> An: argyllcms@xxxxxxxxxxxxx
> Betreff: [argyllcms] Re: ArgyllCMS V1.1.0 RC1 is now available

> Alastair M. Robinson wrote:
> > However, when working with inkjets there's an additional gamma 
> > adjustment required - outside the regular calibration path. Normally 
> > it's buried inside the printer driver, but with enough control over the 
> > driver (which we have with Gutenprint) it doesn't have to be.
> If it's a usable range adjustment then I don't think this is
> necessary or desirable, since it is a linear scaling, and the
> usable range will generally be set such that 100% out of calibration
> results in approximately equal ink in the screened device channels.

I think with "gamma adjustment" Alastair really means a (non-linear) adjustment 
of the mid-tones (and not just a linear scaling in order to stretch a smaller 
"usable range" to the full 0..100% range).


Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 -
sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser

Other related posts: