[argyllcms] Re: ArgyllCMS 1.6.3 work with DTP20?

  • From: Thomas Baumann <thomas@xxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Fri, 19 Dec 2014 17:33:19 +0100

On 19.12.14 13:14, Graeme Gill wrote:
Thomas Baumann wrote:

I have a similar problem with my DTP20, but on Mac OS X 10.9.5. It works fine 
with V1.4.0
(on OS X 10.6.8) but I get communication errors with V1.6.3, using either 
chartread or
spotread. Should I try to compile V1.5.1 for use on OS X 10.9.5 or is there a 
USB patch
for the latest Argyll version available?
        try <http://www.argyllcms.com/disptools_osx64_v1.7beta.tgz>

Graeme Gill.

Thanks Graeme,

I tried the 1.7beta of spotread. Initially, it works well, but after about three consecutive reads, each triggered by the space bar, it takes a long time to 1. detect a keypress and 2. display the measured values. It stays in this sluggish mode until I restart spotread. The debug output (-D 5) also slows down so one waiting loop *) seems to take considerably longer. Hope that helps.

For now, I am happy with 1.5.1 which compiled without problems.


dtp20: Sending 'CS^M' bsize 500, to 0.200000
io_callback: result 0x0, length 3
io_callback: result 0x0, length 5
dtp20: response '01^M<00>^M' ICOM err 0x0

Other related posts: