[argyllcms] Re: ArgyllCMS 1.6.3 work with DTP20?

  • From: jchan@xxxxxxxxxxxxxxx
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Sun, 16 Nov 2014 20:35:54 -0600

On 2014-11-16 19:11, Graeme Gill wrote:
Jerry Chan wrote:
I am a new to Argyll trying to get ArgyllCMS 1.6.3 working with a DTP20 for scanning targets printed from Argyll. The DTP20 works with the XRite software but I am not having any luck with ArgyllCMS. Tried running DTP20 firmware 1.02 and 1.03 with no success.

        there were some regressions in V1.6.X due to the change
in underlying USB access.

Try this <http://www.argyllcms.com/chartread_win32_v1.7beta.zip>
and see if that solves your problem.

Graeme Gill.

Thank you Graeme, I was able to read the target successfully with the updated chartread


Other related posts: