[argyllcms] Re: ArgyllCMS 1.3.2, spyder2 and usb problem - both Win and Lin

  • From: Sergey Artuh <votezec@xxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Wed, 24 Nov 2010 17:51:28 +0200

new log is in here:

I personally didn't found much difference between this and a previous one
but hope it will help. Sources was modified to have DEBUG and executable
timestamp updates so I am pretty sure I was using the debug-modified version

On Mon, Nov 22, 2010 at 1:59 AM, Graeme Gill <graeme@xxxxxxxxxxxxx> wrote:

> Sergey Artuh wrote:
>> Log files aren't very short, so I put them onto a public site:
>> Linux stderr&  stdout : http://dl.dropbox.com/u/1175333/argyll/linux.log
> Hi, the log shows that the instrument is accessed OK, but then fails
> at a latter stage. Unfortunately the diagnostics don't indicate what
> triggered the failure. To get more info, the best way would be to
> #define DEBUG in spectro/dispsup.c, re-compile, and run it again.
> Graeme Gill.

Best regards,
Sergey Artuh

Other related posts: