[argyllcms] Re: Anybody successfully using a DTP51 with Mac OS X?

  • From: Rolf Gierling <mail@xxxxxxxxxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Thu, 28 Jun 2007 12:02:18 +0200

Hello Karl-Heinz,

Am 28.06.2007 um 02:28 schrieb Karl Heinz Kremer:

icoms: About to return read '<81>' ICOM err 0x0

I do not have a DTP51, but a DTP41.
As far as I can remember, there are no response codes
defined that high (<81>), and as far as I remember I
got such values if something was not right in the serial
configuration.

Try to configure the instrument to a standard configuration
with x-rites toolcrib to 9600, 8 bit, 1 stopbit and no parity
and make that permanent.

Rolf

-----------------------------------------------------
Multitools
Dipl.-Ing. Rolf Gierling

Colormanagement
Consulting - Development - Distribution

Mariabrunnstr. 16
52064 Aachen
Germany

Tel.  +49 (0) 2 41 / 4 01 25 79
Fax. +49 (0) 2 41 / 4 01 25 83
mail@xxxxxxxxxxxxxxxxxxxx
www.multitools-online.de

Author of "Farbmanagement"
3rd Edition July 2006
mitp Verlag, Bonn
ISBN 3-8266-1626-X

Other related posts: