[argyllcms] Anybody successfully using a DTP51 with Mac OS X?

  • From: "Karl Heinz Kremer" <khk@xxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Wed, 27 Jun 2007 20:28:58 -0400

I'm trying to get a DTP51 working on my Mac. I seem to get some
communication going, but before anything useful happens, printread
stops with an error message. I'm using version 0.60.

Here is the log that the command generates:

printread   -v -d -i51 R800

Steps in each Pass = 18
Passes in each Strip = '66' = 6, 6
icoms: About to set port characteristics
icoms: About to open port '/dev/cu.PL2303-0000101D'
icoms: Opened port OK, fd = 5
icoms: port characteristics set ok

icoms: Write_Read called with '^M'
About to write '^M' ICOM err 0x0
icoms: Read called
icoms: About to return read '' ICOM err 0x1000
icoms: Read returning with 0x1000
icoms: Write_Read Write failed - returning 0x1000
icoms: About to set port characteristics
icoms: port characteristics set ok

icoms: Write_Read called with '^M'
About to write '^M' ICOM err 0x0
icoms: Read called
icoms: About to return read '<81>' ICOM err 0x0
icoms: Read returning with 0x0
icoms: Write_Read Write_Read success, returning '<81>'
About to write 'CE^M' ICOM err 0x0

icoms: Write_Read called with '0104CF^M'
About to write '0104CF^M' ICOM err 0x0
icoms: Read called
icoms: About to return read '<81>' ICOM err 0x0
icoms: Read returning with 0x0
icoms: Write_Read Write_Read success, returning '<81>'
About to write 'CE^M' ICOM err 0x0
Establishing communications with instrument failed with message
'Non-specific error' (Unrecognized command)
icoms: delete called
icoms: closing port

This is through a USB/Serial adapter. When I use a terminal program, I
can talk to the device.

Any advice?

Karl Heinz

Other related posts: