Yesterday I found another problem wich might be related to this topic. I was running dispcal on a Win 7 mashine with two monitors attached. After finishing the first one, I declared the profile as standard and rebooted the mashine. Everything was OK. After calibrating and profiling the second one, there was a problem with the calibration loader (after reboot), so I had to load my profiles manually. Any ideas? Regards Vladimir -- Gesendet von meinem Palm Pre Eric Thomas <eric@xxxxxxxxxxxxx> schrieb am 24.08.2010 02:12: On Mon, Aug 23, 2010 at 5:35 PM, Juergen Lilien <jp.lilien@xxxxxxxxxxxxxx> wrote: > Eric Thomas wrote: > >> However, because of the 1 second delay I mentioned, there seems to be >> a race condition going on and the displayGUI profile loader is running >> before the other app (or Win7) that is changing the profile. > > Have you tried to set a 30s delay in the task scheduler to prevent > the race condition? > > Regards, Juergen > Yes, and that worked. But the problem was fixed when I removed igfxpers.exe. (see my other post) Thank you! - eric