[aravis] Re: Aravissrc: Multi-camera Ethernet Network Performance

  • From: Emmanuel Pacaud <emmanuel.pacaud@xxxxxxxxxxxxx>
  • To: aravis@xxxxxxxxxxxxx
  • Date: Fri, 17 Nov 2017 08:48:00 +0100

Hi Nils,

Le ven. 17 nov. 2017 à 7:39, Nils Hasler <hasler@xxxxxxxxxxxxxx> a écrit :

I have one system that stably runs 24 Point Grey cameras over a single 10Gbe link and dozens of systems that run between 8 and 16 cameras either on 10Gbe or one camera per port. We mostly use Point Grey but Basler also works great plus a couple of Allied Vision systems.

Interresting ! Could you share a bit more of informations about your setup ? What resolution, frame rate, if the camera are synchronized or not ?

So far my experience with USB has been mixed but it's again a hardware issue.

You experience was with using aravis ?

Cheers,

        Emmanuel.


Other related posts:

  1. Home
  2. aravis
  3. Archive
  4. 11-2017