On 11 Nov 2020 as I do recall,
Harriet Bazley wrote:
On 10 Nov 2020 as I do recall,That pretty much worked:
Frank de Bruijn wrote:
In article <3a6742cd58.harriet@xxxxxxxxxxxxxxxxxx>,I tried 70 in the hopes of retaining the RCPT-TO data, i.e. logging who
Harriet Bazley <lists@xxxxxxxxxxxxxxxxxx> wrote:
Is there any way to configure the logging level of the built-in
version of MSC?
Logging is done with SysLog, so using a low syslog value should work.
Just change the SysLog line in !AntiSpam.Resources.MSC.Send
A value of 50 should do if you still want all types of errors logged.
the messages were actually sent to and when, but only got the single
line "060 1 message to send". I'll try 80 and see what happens.