In article <4e90245da1antispam@xxxxxxxxxx>, Frank de Bruijn <antispam@xxxxxxxxxx> wrote: > In article <4e9020db7bSteve@xxxxxxxxxxxxxxxxxx>, > Steve Joyce <Steve@xxxxxxxxxxxxxxxxxx> wrote: > [snip] > > Looking at the logfile for !AntiSpam, the 1st run on box 1 contains an > > error message, typically: > > 01 Dec 21:16:06 040 Internal error: abort on data transfer at > > &03A1E39C in "UserTests 1.54 13-12-2004" at line 226 > See the StrongHelp manual, the first entry on the page 'Known problems > and restrictions'. > > I don't knowingly use any UserTests, > Removing the UserTests file from your Choices directory may help. Then > again, it may not... :-( > There are at least two bugs that might cause problems with 1.59.1. I > suggest you upgrade to 1.59.5. That *may* also (miraculously) cure the > 'abort on data transfer' problem. As suggested I downloaded v1.59.5 to replace 1.59.1 but problem persists. Removed UserTests file and apparent success as AS then ran to completion. However, after a few days of normal working, yesterday's run died silently part way through with the same problem. Logs show abort on data transfer in <AntiSpam$Dir>.Docs.Defines 1.59.4 24-11-2006 at line 35. Same problem different apparent source. The problem for me has only surfaced since I started using 2 maiboxes, so I guess that might fit in with re-connecting with the mail server. So far, it always works at the second attempt. Cheers, Steve