[amayausers.com] Re: thread shreading
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 2 May 2008 17:45:21 UT
This message was posted by Steve on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/520.html#000005
The area under the needle plate is the rotary hook, do not use any sharp obects
there, it could be as simple as using your lint brush or canned air and blow
out any debris that is in there. (blowing air will find lint and thread and
stuff you can't see.) Are the thread breaks on all colors or just one? If it is
just one, replace the needle, if it is all, try what I said above.
You can buy a can of compressed air at any office supply or computer store for
about $4.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
