[amayausers.com] Re: thread setup 101
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 5 Dec 2008 23:01:02 UT
This message was posted by Shuffletown Embroidery on AmayaUsers.com. PLEASE DO
NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/773.html#000010
I forget who it was on this group who put me onto how to install the 1100m
Madeira thread, otherwise I would give him credit for this. The tube/core fits
very snugly in the hole in the top of the plastic holder. You also have to use
the cardboard circle to keep the thread from falling down. Push the tube of the
thread through the hole in the circle and into the hole in the top of the
plastic piece. Make sure it seats so that there is no space underneath the
thread so that it can't get caught. Holds perfectly but takes a little practice.
The newer "cardboard" circles are plastic coated, so the thread core doesn't
push through them without doing 3 or 4 relief cuts in the cardboard hole. This
will allow it to fan out so the core will go through. I sure hope this makes
sense to whoever is interested.
Mary
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
