[amayausers] Re: slimline installation

  • From: webmaster@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Sun, 11 Mar 2007 20:58:02 UT

This message was posted by Debbie Rinehart on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/72.html

I just put my new slimline clamps on and got a bit befuddled while reading 
their instructions.  They had me loosen the 4 mounting bracket screws so the 
clamp base will move freely in the mounting bracket. They never said to tighten 
them back down when everything was installed.  Won't this cause some 
misallignment of the design.  ALSO, they said install the peel and stick UHMW 
(never said what that stands for) wear strip tape (not provided as told), on 
the top of the sewing arm. The tape will run from the rear edge of the throat 
plate back. No tape; no diagram showing WHAT throat plate and WHAT sewing arm.  
Instructions say the clamp will be sitting on the sewing arm.  Won't that cause 
a problem if metal touches metal as the clamp moves?  And, the clamp window has 
3 parts to each size selected; 1 bright yellow is the lower window that is 
secured to the base with a black knob, then there are one yellow in addition to 
one stainless steel upper windows, which attaches to the clam
 ping arm.  They never tell you which one you use.  I am totally confused. The 
directions leave a LOT to be desired if you ask me.  They tell you to do 
several things that are not possible (like push the black knob that holds the 
lower window stright down to locate the clamp base on top of the UHMW wear 
strip and set the proper height for support by the sewing arm.  Well, it 
actually screws on and I don't get the rest of the babble about a wear strip 
and proper height...)  I know this is kind of long, but so is my 
confusion...I'm afraid to turn the machine on and try this out for fear it may 
catch on something and break it.  THANKS FOR ANY AND ALL HELP!!   Debbie
Debbie Rinehart
Deb'z-N-Stitches
Martinsville, In.
765-342-7392
=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: