So the Fast Frame comes with clamps or is this something I buy separately? -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Evelyn Runge Sent: Tuesday, October 25, 2005 1:48 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: slim line hoop clamp Ditto Herb! I now own both, and I never use the sticky paper frames. I've thought about using them to frame things to hang on the wall, but they would probably fall off too! :0). Anyway, I like the clamping system, but am very careful about using it on the Amaya (I don't have the newer models). Evelyn - Express It With Thread ----- Original Message ----- From: "HK Acree" <hkacree@xxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Tuesday, October 25, 2005 2:04 PM Subject: [amayausers] Re: slim line hoop clamp > Dean, > I'm going to own up here. I bought the fast frames and frankly find > them pretty much a waste of money. While there have been a few > projects they did > make easier, after some experience I could have done them without the > fast frames. The adhesive is not strong enough to hold much of > anything. If I had > it to do over I would have gone for a clamping system. > > Herb > Royal Embroidery > ----- Original Message ----- > From: "Dean Zellman" <mrstitch@xxxxxxxxxxx> > To: <amayausers@xxxxxxxxxxxxx> > Sent: Tuesday, October 25, 2005 8:15 AM > Subject: [amayausers] Re: slim line hoop clamp > > > > On this subject, > > > > I have the chance to get either the Fast Frame hooping system - the > > one where you use sticky paper or the Hooptec clamping system. > > > > Can anyone give me some feedback on one over the other? > > > > Thanks > > > > Dean Zellman > > Mr. Stitch Embroidery > > (818) 386-9626 > > Visit us on the Web at www.mr-stitch.com > > > > > > -----Original Message----- > > From: amayausers-bounce@xxxxxxxxxxxxx > > [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. > > Irish III > > Sent: Tuesday, October 25, 2005 5:03 AM > > To: amayausers@xxxxxxxxxxxxx > > Subject: [amayausers] Re: slim line hoop clamp > > > > > > Anyone seen and/or using the Hooptec slim line clamping system on > > the Amaya? From what info I've recieved it has a lower profile than > > the regular hooptech and the Melco hooping clamp so it won't run > > into the presser foot and needle head? Roland > > > > > >