[amayausers] Re: red feed wheels breaking?
- From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 12 Jan 2007 10:51:30 -0700
Tom,
You mean the "needle case cover". There is a magnetic cover at the lower
portion of the front needlecase cover. once this is removed you will see the
two attachment screws that hold the cover in place. The magnetic cover has
Amaya printed on the face of it.
Rod Springer
Melco Tech
----- Original Message -----
From: "Veena Viswanath" <irisembroidery@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Friday, January 12, 2007 9:37 AM
Subject: [amayausers] Re: red feed wheels breaking?
> The screws are in the back. You do not need to remove any needles. You
> should have a L shaped bent screw in your kit which you use to remove the
> screws.
>
> Veena.
>
> Iris Embroidery
> 510-226-6171
> www.irisembroidery.com
> Embroidery, Screen-printing or Promotions!!
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Tom Ladow
> Sent: Friday, January 12, 2007 7:56 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: red feed wheels breaking?
>
> Rod;
> Any special tips on removing the needle plate cover. At first glance I
> can
> not tell where the attaching screws are located. Do you have to unthread
> all needles to do this?
>
> Tom L.
> Indiana
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
> webmaster@xxxxxxxxxxxxxx
> Sent: Friday, January 12, 2007 10:29 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: red feed wheels breaking?
>
> This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT
> REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
> here:
> http://www.amayausers.com/boards/ultimatebb.php?/topic/1/39/2.html#000015
>
> Debbie,
> Always replace the black cover on the thread feed roller, before putting
> the
> red pinch roller back on..it is much easier that way. I gives you more
> room
> to manuver the cover that way.....
> Rod Springer
> Melco tech & trainer
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
