Sorry I will do so I did not noticed it till just now. Sorry for the confusion. Bebe -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Paul Tilton Sent: Monday, October 24, 2005 6:26 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: oil applicator bottle Bebe, Could you fix the date on your computer? You are a month ahead of everyone else... Thanks... At 06:20 PM 11/24/2005 -0800, you wrote: >Hi Roland, > >I think I have the bottle you have described on hand and I has since called >the technician in to help. He also asked me to turn off the bobbin sensor >and I did and finally my design sewed all the way to the end. That was a >relieve. > >I have not asked Melco for the updated version of the design shop or OS. I >am not sure what was out recently. I remember the group talking about it and >I did not pay attention as I did not start up the shop yet. Now I am in full >blast and need to find out what is what and better get the version in quick. > >I wil try and call you tomorrow to talk if this is okay with you. > >Thank you once again for your help. > >Bebe >Empress place > > > >-----Original Message----- >From: amayausers-bounce@xxxxxxxxxxxxx >[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish III >Sent: Saturday, October 22, 2005 5:37 AM >To: amayausers@xxxxxxxxxxxxx >Subject: [amayausers] Re: oil applicator bottle > >The machine oil 'applicator' is a clear tube about 1" wide and 4" long-with >a brass 'needle' couple inchs long coming out of the cap. Ours is bent to >make it easier to get the tip into the bobbin assembly area. There is a >'refill' bottle I believe but I'm not sure what that looks like-haven't had >to refill our applicator yet! >Roland > > > > > > > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.1.361 / Virus Database: 267.12.4/146 - Release Date: 10/21/2005 Paul Tilton Sandhills Stitches Whispering Pines, NC 910-949-3211 www.sandhillsstitches.com