[amayausers.com] Re: need help with standard machine (Machine type 322065 - 324999) **URGENT**
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 9 Apr 2010 09:45:10 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/920.html#000004
Bryan,
It sounds like your main board may not be configured correctly for the type of
machine you're installing it in.
Double check your configuration otherwise it will be looking for the wrong
sensors when it initializes.
You will want to get with your Melco source for technical information as we are
not allowed to send proprietary information out to unknown sources.
Best of luck,
Ed
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
