This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/760.html#000002 Yes...done it many times when we get an 'oops-wrong color thread!' or something else. If the element is in a 'color needle' by itself-just go to (in your Amaya OS window you have open) SETTINGS, 'move' tab and you can 'move' to the right 'color' (needle # in sequence) or the exact stitch number- and when you press the green 'start' button-it goes to that needle 'color' sequence and sews. If you have different elements in the same color 'sequence' you can 'advance' through that to get to your element. Easier than starting at the beginning and advancing through all of it! Just remember...if this isn't your final color-it will CONTINUE after this color is done! SO be ready to STOP it. ALso,if you have to change to a different 'needle' for a different color-before you start to sew, you can use your keypad to move the needle head to the color you want. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================