Question what color thread are you using? Kevin. frank davis wrote: >Sorry, already tried that. This micro times has been a problem for me for >since I started trying to use it almost two years ago. >Thanks again, you all have jogged my memory on some things I had forgotten. >Frank >----- Original Message ----- >From: "Kevin A. Wasik" <kwasik@xxxxxxxxx> >To: <amayausers@xxxxxxxxxxxxxxxx> >Sent: Thursday, April 15, 2004 9:13 PM >Subject: Re: [amayausers] micro times > > > > >>Hey Frank >> >>Note: you can tighten the bobbin little more it should be fine for >>the runs you are doing. Then you can reset the bobbin back to Amaya specs. >>Kevin Wasik. >>Melco Field Tech. >> >> >>frank davis wrote: >> >> >> >>>Thanks Kevin. I tried 40 and 30. It did help, but I still have a few >>>bobbin threads showing. I'll keep playing. >>>Frank >>>----- Original Message ----- >>>From: "Kevin A. Wasik" <kwasik@xxxxxxxxx> >>>To: <amayausers@xxxxxxxxxxxxxxxx> >>>Sent: Wednesday, April 14, 2004 11:07 PM >>>Subject: Re: [amayausers] micro times >>> >>> >>> >>> >>> >>> >>>>40 works good. Don't forget to reset it back to 50 after you are done. >>>>Kevin Wasik. >>>>Melco Field Tech. >>>> >>>> >>>>frank davis wrote: >>>> >>>> >>>> >>>> >>>> >>>>>No, that's one I haven't tried. Actually I forgot about it. I'll give >>>>> >>>>> >>>>> >>>>> >>>it a >>> >>> >>> >>> >>>>>shot. Thanks Janel. >>>>>Frank >>>>>----- Original Message ----- >>>>>From: "Janel Harris" <janel@xxxxxxxxxxxxxx> >>>>>To: <amayausers@xxxxxxxxxxxxxxxx> >>>>>Sent: Wednesday, April 14, 2004 9:22 PM >>>>>Subject: RE: [amayausers] micro times >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>Frank, >>>>>> >>>>>>Have you tried lowering the column feed? >>>>>> >>>>>>Janel Harris >>>>>>Dimensional Designs >>>>>>http://www.dimdesigns.com >>>>>>Contract Digitizer >>>>>>Melco On-Site Trainer >>>>>> >>>>>> >>>>>>-----Original Message----- >>>>>>From: frank davis [mailto:fadavis@xxxxxxxxxxxx] >>>>>>Sent: Wednesday, April 14, 2004 5:45 PM >>>>>>To: Amayausers@xxxxxxxxxxxxxxxx >>>>>>Subject: [amayausers] micro times >>>>>> >>>>>>Does anyone but me have trouble with micro times. >>>>>>I'm using a 70/10 sharp needle on poplin. The lettering is .26'' and >>>>>>set to specs. Lettering looks good except for the white bobbin thread >>>>>>that gets pulled up through several times per letter. I've tried >>>>>>everything I can think of; material thickness, bobbin tension speed, >>>>>>pull comp, ect. Does anyone else have this problem? Just wondered >>>>>> >>>>>> >if > > >>>>>>someone can suggest something I'm missing. The bobbin thread in red >>>>>>lettering doesn't look that great. >>>>>>Thanks, >>>>>>Frank >>>>>>Force Ten >>>>>> >>>>>> >>>>>>--------------------------------------------------------------------- >>>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>--------------------------------------------------------------------- >>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>--------------------------------------------------------------------- >>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>>> >>>> >>>> >>>> >>>> >>>> >>> >>>--------------------------------------------------------------------- >>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>> >>> >>> >>> >>> >>> > > > >--------------------------------------------------------------------- >To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx