[amayausers] Re: micro times
- From: "wl solomonson" <wlsolomonson@xxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxxxxx
- Date: Thu, 15 Apr 2004 21:42:09 -0500
Another 'list' has covered the subject of the magnetic bobbins and it
sounded like everyone that tried them really like them mostly because they
could run them almost to the end and maintain consistent tension. I haven't
used them but thought you might be interested in what I've read elsewhere.
Wendy
Itchin' To Stitch
MN
>From: "Body Cover Staff" <info@xxxxxxxxxxxxxxxxxxx>
>Reply-To: amayausers@xxxxxxxxxxxxxxxx To: <amayausers@xxxxxxxxxxxxxxxx>
>Subject: Re: [amayausers] micro times
>Date: Thu, 15 Apr 2004 18:23:32 -0700
>
>Kevin,
>Is Amaya specs calling for the 2" to 4" drop for
>bobbin tension still I remember it was stated one
>way then changed early on when they first came out.
>What do you suggest/ cause mine changes constantly especially
>after 3/4 of the bobbin is gone.
>Has anyone tried the magnetic bobbins? they are supposed to maintain
>consistent tension through the whole bobbin.
>Just wondering.
>Thanks in advance!
>Ron Vinyard
>Owner / Graphic Designer
>Body Cover / Magic Stitches
>420 S.W. "H" Street
>Grants Pass, OR 97526-2532
>
>1-888-435-0176
>1-541-471-1504
>Fax 541-471-0427
>www.bodycoverdesign.com
>
>
>----- Original Message -----
>From: "Kevin A. Wasik" <kwasik@xxxxxxxxx>
>To: <amayausers@xxxxxxxxxxxxxxxx>
>Sent: Thursday, April 15, 2004 6:13 PM
>Subject: Re: [amayausers] micro times
>
>
> > Hey Frank
> >
> > Note: you can tighten the bobbin little more it should be fine for
> > the runs you are doing. Then you can reset the bobbin back to Amaya
>specs.
> > Kevin Wasik.
> > Melco Field Tech.
> >
> >
> > frank davis wrote:
> >
> > >Thanks Kevin. I tried 40 and 30. It did help, but I still have a few
> > >bobbin threads showing. I'll keep playing.
> > >Frank
> > >----- Original Message -----
> > >From: "Kevin A. Wasik" <kwasik@xxxxxxxxx>
> > >To: <amayausers@xxxxxxxxxxxxxxxx>
> > >Sent: Wednesday, April 14, 2004 11:07 PM
> > >Subject: Re: [amayausers] micro times
> > >
> > >
> > >
> > >
> > >>40 works good. Don't forget to reset it back to 50 after you are done.
> > >>Kevin Wasik.
> > >>Melco Field Tech.
> > >>
> > >>
> > >>frank davis wrote:
> > >>
> > >>
> > >>
> > >>>No, that's one I haven't tried. Actually I forgot about it. I'll
>give
> > >>>
> > >>>
> > >it a
> > >
> > >
> > >>>shot. Thanks Janel.
> > >>>Frank
> > >>>----- Original Message -----
> > >>>From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
> > >>>To: <amayausers@xxxxxxxxxxxxxxxx>
> > >>>Sent: Wednesday, April 14, 2004 9:22 PM
> > >>>Subject: RE: [amayausers] micro times
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>>Frank,
> > >>>>
> > >>>>Have you tried lowering the column feed?
> > >>>>
> > >>>>Janel Harris
> > >>>>Dimensional Designs
> > >>>>http://www.dimdesigns.com
> > >>>>Contract Digitizer
> > >>>>Melco On-Site Trainer
> > >>>>
> > >>>>
> > >>>>-----Original Message-----
> > >>>>From: frank davis [mailto:fadavis@xxxxxxxxxxxx]
> > >>>>Sent: Wednesday, April 14, 2004 5:45 PM
> > >>>>To: Amayausers@xxxxxxxxxxxxxxxx
> > >>>>Subject: [amayausers] micro times
> > >>>>
> > >>>>Does anyone but me have trouble with micro times.
> > >>>>I'm using a 70/10 sharp needle on poplin. The lettering is .26''
>and
> > >>>>set to specs. Lettering looks good except for the white bobbin
>thread
> > >>>>that gets pulled up through several times per letter. I've tried
> > >>>>everything I can think of; material thickness, bobbin tension speed,
> > >>>>pull comp, ect. Does anyone else have this problem? Just wondered
>if
> > >>>>someone can suggest something I'm missing. The bobbin thread in red
> > >>>>lettering doesn't look that great.
> > >>>>Thanks,
> > >>>>Frank
> > >>>>Force Ten
> > >>>>
> > >>>>
> >
> >>>>---------------------------------------------------------------------
> > >>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > >>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>
> > >>>---------------------------------------------------------------------
> > >>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > >>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>
> > >>---------------------------------------------------------------------
> > >>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > >>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > >---------------------------------------------------------------------
> > >To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > >For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> > >
> > >
> > >
> > >
> >
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar ? get it now!
http://toolbar.msn.com/go/onm00200415ave/direct/01/
---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
Other related posts:
