And you can use them under a can of soda as well!! but at just under a buck a piece, you don't want to find TOO many uses! : ) ----- Original Message ----- From: "wl solomonson" <wlsolomonson@xxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Wednesday, January 12, 2005 3:21 PM Subject: [amayausers] Re: madeira thread > By coasters do you mean the white ones that came with the machine? I've > always wondered what they were for. Should they be under the ARC thread > too? > Wendy > Itchin' To Stitch > MN > >>From: "Jack Fuller" <jack@xxxxxxxx> >>Reply-To: amayausers@xxxxxxxxxxxxx >>To: <amayausers@xxxxxxxxxxxxx> >>Subject: [amayausers] Re: madeira thread >>Date: Wed, 12 Jan 2005 14:59:41 -0700 >> >>Works fine Wendy. Just be sure put the little coasters on first. I like to >>use a 65/9 needle too. >>Jack Fuller >> >>-----Original Message----- >>From: amayausers-bounce@xxxxxxxxxxxxx >>[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Itchin To Stitch >>Sent: Wednesday, January 12, 2005 2:07 PM >>To: Amaya User Group >>Subject: [amayausers] madeira thread >> >> >>I'm need to order some 60 wt. Madeira poly and it looks like it's only >>available in a smaller cone like the 1000m ARC's. Just want to make sure >>those cones will fit on the tubes. I know the 5000m cones need the longer >>tubes but wasn't sure about the smaller cones. >>Thanks! >>Wendy Solomonson >>Itchin' To Stitch >>Arlington, MN >>(507)964-2224 >> >> >> >> > >