[amayausers.com] Re: loud noise, cables loose?

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Wed, 6 May 2009 22:57:35 UT

This message was posted by djames on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/684.html#000006

Have you by chance upgraded to v9 software?  If you have, the problem you are 
having is caused by the way the software runs the machine.  The x cable 
definitely needs to be tightened.  You need to contact Melco because the amount 
of tension has changed to a tighter setting than what is shown in the operators 
manual.  I do know that they are working on a new tool that will help with this 
tension.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: