[amayausers.com] Re: lettering problems
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 17 Jun 2010 11:28:53 UT
This message was posted by cbireley on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/972.html
I have noticed that when my machine is at "full speed" sometimes the lettering
becomes very wide, almost distorted/misshapen. If I slow the machine down, it
stitches out great. This has happened on polo shirts to canvas bags. I've
used auto feed/std. feed. I cannot pin point why this is happening. I do not
want to slow my machine down to do lettering. Does anyone have any feedback to
eliminate this issue? Thanks!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
