I have this problem as well. Just recently I was using a large hoop for the back of a shirt and every time the trimmer was positioned over the hoop arm it hit it. I hate to start bending piece of equipment that is critical to the operation of the machine Cindy Chamberlin Impressive Threads Custom Embrodiery Ofc: 623-879-9761 Cell: 602-710-0887 impressivethreads@xxxxxxx -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Shuffletown Embroidery Sent: Friday, October 13, 2006 5:24 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: hitting hoop arm on trims Hey there, I've tried that. Unfortunately, it didn't seem to help. :( Mary Buckle Shuffletown Embroidery Charlotte, NC 704-398-1273 -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of OnleeJudy@xxxxxxx Sent: Friday, October 13, 2006 7:20 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: hitting hoop arm on trims Hi Mary. I had that happening, and told a tech about it when he was out here. He had a very low-tech solution to a very high-tech problem. He pushed down on it slightly, apparently bending it ever so slightly. Poof. No more banging. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================